Personal Protective Equipment (PPE)

The new standard safety requirements in medical and dental centers nationwide, including dental practices and dental laboratories, have increased the demand for effective PPE. Through DSG's Digital Experience Center (DXC) and our 3D Printing technology we are offering PPE that helps your office source custom fitted PPE to protect your staff and help prevent the spread of germs.

Want create site? Find Free WordPress Themes and plugins.

DSG PPE Products

Face Mask Fitter

Improve the fit and function of any standard surgical or procedural mask with a 3D printed Face Mask Fitter customized to the contours of your face. Simply scan your face using an iPhone/iPad Pro with the bellus3DTM FaceApp and submit the STL file to DXC where we 3D print a custom framework. The customized fitter creates a better seal and improves the effectiveness of any standard procedural mask.* The mask fitter will withstand up to 4,000 use cycles with cold sterilization (do not autoclave.)

$25.00 + Shipping

Advanced Face Mask Fitter

Improve the fit and function of any standard surgical or procedural mask with a 3D printed face mask fitter customized to the contours of your face. The advanced Mask Fitter features a 3D bridge that holds the mask away from your mouth for easier breathing. Simply scan your face using your iPhone/iPad Pro and the bellus3DTM FaceApp and submit the STL file to DXC where we 3D print a custom framework. The customized fitter creates a better seal and improves the effectiveness of any standard procedural mask.* The mask fitter will withstand up to 4,000 use cycles with cold sterilization (do not autoclave.)

$35.00 + Shipping

Ear Saver

The ear savers are available to help alleviate any discomfort from all day wear of your mask and Face Mask Fitter combination. They easily attach to the sides of the Mask Fitter for additional comfort.

$5.00 + Shipping

5 Easy Steps to Order Your Custom Mask Fitter

Step 1

Download the bellus3D FaceApp onto an iPhone or iPad Pro, currently only available on iTunes. 

DOWNLOAD HERE

Step 2

Follow the prompts to scan your face with the FaceApp

Step 3

Once the scan is complete select “Mask Fitter” 

Step 4

Export and save the STL file to your computer 

Step 5

Submit STL and order online at:

DSG SHOP

Questions?

Download this helpful FAQ flyer or call 800.351.1720

Using Your Face Mask Fitter

Upon receipt of your Mask Fitter, use an elastic band and attach it to the fitter. 

Put your mask on first, then put your Mask Fitter over the mask. (If using an unsecured material hold it in place over your face as you apply the Mask Fitter). 

Check the fit of your Mask Fitter. When fitted properly, the mask material should move in and out with your breath and minimal air should escape around the outside edges of the fitter. 

Carefully remove the fitter while avoiding contact with your eyes.  

Use cold sterilization to sanitize between uses. 

*Warning: While the Face Mask Fitter seems to improve the seal of a standard face mask, it has not been tested for effectiveness in preventing COVID-19, and you should use at your own risk. 
Did you find apk for android? You can find new Free Android Games and apps.